NAVIGATION
Quick Links
Compare Products
You have no items to compare.
Recently Viewed
-
Allen & Heath PA12 Live Sound Mixer
£489.00 -
Allen & Heath Mix Wizard WZ316:2
£979.00 -
Allen & Heath GSR24M
£5,299.00 -
Allen & Heath GL2400 32 Channel Console
£2,132.27 -
Alesis Vocal Zapper
£66.99
Allen & Heath PA20CP Powered Live Mixer
The PA-CP are a range of sturdy,"all in one" powered mixers, which are sure to deliver loads of weighty power from their Constant Power amplifiers. These mixers are very well thought-out and offer vast operational flexibility for any live sound situation and sound engineers of any experience.
.
- 16 mono channels with Mic [XLR] & Line [TRS] inputs. Line input overrides the XLR input. Individual +48V phantom power switches are provided. New padless two-stage preamp with smooth gain law. Line input goes to second stage for better matching and performance. Switched 100Hz high pass filter. Insert point. 4 band EQ. 4 aux mixes. Mute with LED. PFL button with LED [functions as peak indicator]. 100mm fader
- Shelving LF [60Hz],and HF [12kHz]. Fixed LM [250Hz],and swept HM [300Hz - 6kHz]. The fixed 250Hz control has been carefully selected to provide reduction of muddy sounds and enhance warmth
- Two stereo channels with two unbalanced stereo inputs on each. One is RCA one is TRS jack. Independent gain controls provide source mixing in the channel strip. The top inputs [RCA] can be switched direct to L&R instead of the channel strip providing extra returns. Two band shelving EQ. 4 aux mixes. Stereo balance, mute with LED, PFL with LED,and 100mm fader as mono channels.
- From all channels: 2 pre-fade for foldback mixes - these have 100mm fader masters, mute switch with LED, AFL with LED,and TRS outputs [can be routed internally to output section]. 1 post-fade aux mix for FX - this feeds the internal FX and has a TRS jack output for external FX. 1 post-fade aux mix to TRS jack output is provided for external FX or special feeds.
- Main stereo mix output has 100mm fader control & mute with LED. TRS jack outputs. Mono sum output with level control with switch for subwoofer mode to TRS jack. Record output [RCA] analogue + SPDIF switchable pre/post fader. Twin 12 segment LED bar meter shows program [or PFL /AFL]. Insert points on TRS jack for external processing. Output EQ and routing to internal amplifiers / external systems is provided.
- 4 band semi-parametric EQ is provided in the output section, this affects the TRS slave outputs,and the internal constant power amplifiers. This offers more control than graphic equalisers for precise management of speakers,especially foldback / monitors. Source selector allows output EQ section to be used on Left / right, L&R sum / foldback1, or foldback1 / foldback2.
- 1kW i.e. 2 x 500W RMS peak power professional class AB power amplifiers built in. Unique ALLEN&HEATH design gives full output into 4 OR 8 ohms [rear switch selector]. Output is to locking SpeakonA™ connectors. Thermal management twin fan system. Full protection - input limiter to prevent clipping,short circuit protection, current limit and DC fault sensing. LED indication of: signal presence, peak warning,speaker protect and temperature. AB amp input TRS break-jacks [normalised to output section / slave out jacks] allow independent use of the power amplifiers if desired. Standby mode switch puts amplifier into protect with speakers isolated.
- 16 program digital FX processor provides reverbs, delays, chorus and others, inc combined. This FX module takes its feed from the post-fade FX aux on the mono & stereo channels. The output of the FX module is controlled by a 100mm fader with mute & PFL and is routed to the stereo mix and FB1&2 with post fade level controls. At this point,2 TRS inputs with level control provide a way of combining external FX with the internal unit. Internal FX unit can be switched off to use external only if preferred. A footswitch TRS jack is provided to mute the FX channel.
- Background music BGM mode - plays 2 track input into the main mix post fader,allows user to pull down fader (whilst patching, taking a break, or during walk-in) and leave music playing through the amplifiers / speakers. 2 track input [RCA] with level control to L&R - feeds headphone monitor selector [checking recording]. Twin,3 colour 12 segment LED meter displays active monitor source. Large LED indicates PFL / AFL active - signal overrides L&R / 2TRK monitor source selection. Standby switch uses relays to disconnect the speakers. 2 track output [RCA] analogue + SPDIF allows direct to digital recording. Switchable pre / post master L&R fader. Mono sum out with level [TRS] - mode switch to provide sub feed with 100Hz low pass filter. Phones out [TRS] with level.
- Socket for optional lamp
.
Write Your Own Review
You're reviewing: Allen & Heath PA20CP Powered Live Mixer
No Avaialble Video