ASHDOWN ABM500 EVO III Bass Head
The ABM 500 EVO III is a 575 watts RMS bass amp head designed to satisfy both bass-purists and tech-heads alike.
Three straight forward rotary tone controls provide 20dB of cut and boost at 60Hz,660Hz and 5kHz,and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz,340Hz,1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch,enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting.
An on-board compressor and the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone.
Specifications
Three straight forward rotary tone controls provide 20dB of cut and boost at 60Hz,660Hz and 5kHz,and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz,340Hz,1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch,enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting.
An on-board compressor and the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone.
Specifications
- Power Output (RMS) 575W
- Power Requirement 230 / 115V
- Frequency Response -3dB at 17Hz and 30kHz
- Speaker Outputs Minimum impedance 4 Ohms
- DI Output
- EQ Bass +/-15dB @ 45Hz
- Middle +/-15dB @ 660Hz
- Treble +/-15dB @ 7kHz shelving
- Slider 1 +/-15dB @ 180Hz
- Slider 2 +/-15dB @ 340Hz
- Slider 3 +/-15dB @ 1.3kHz
- Slider 4 +/-15dB @ 2.6kHz
- H x W x D (mm) 134 x 474 x 315
- Weight (kg) 14
Write Your Own Review
You're reviewing: ASHDOWN ABM500 EVO III Bass Head
No Avaialble Video





