BOSE L1 Model 1 PA System with 2x B1

The BOSE L1 Model 1 is a unique,all-in-one system that delivers clear, powerful sound across the stage and throughout small to medium-sized venues,and with the inclusion of two B1 Bass Modules, the low-end performance will be enhanced with a greater range,and a more defined sound. The BOSE L1 Model 1 will allow the performers to hear what your audience hears,and eliminate the need for conventional monitors, mixers and PA systems. This system package is recommended for use with a full range of instruments, from delicate flutes, to roaring basses,and everything in between.

BOSE have carried out over 10 years of groundbreaking research to develop and perfect their products and the L1 Model I concert sound system is a perfect example of their expertise, featuring Spatial Dispersion loudspeaker technology,available only from Bose. The loudspeakers proprietary, vertical design helps fill the room with sound of such clarity and power,like no ordinary concert speaker can. With consistent tonality ensured wherever you are in relation to the speaker and, due to minimal sound being radiated up or down, there is a reduction of the majority of the unwanted room reverberation, this system really shines when compared to other similarly powered systems.

The innovative L1 Model I Cylindrical Radiator consists of a line array of 24 small drivers mounted into the vertical enclosure for wide, horizontal sound radiation of nearly 180 degrees. When put up against conventional stage speakers, volume and tone diminish very slowly over distance.
The power stand comes with matched amplifiers to drive the loudspeaker and up to two B1 bass modules. Additionally it has an integrated four-channel mixer along with two XLR and two line-level inputs.

The Bose B1 bass modules are considerably lighter and more compact than traditional bass bins required to provide the same performance. The L1 Model I double bass package is designed for DJs and bass/baritone instruments, including electric bass, organ and kick drum. It produces the same tone as the single bass package, but with much higher output levels. With a highly efficient speaker design, featuring two 5.25" (13.3 cm), high-output, high-excursion drivers that produce full,strong bass from a small enclosure. When connected to power stand,active equalization circuitry automatically adjusts bass signal appropriately. Up to 4 B1 Bass Modules can be stacked together safely with thier included interlocking feet.

Another exclusive from Bose is the onboard ToneMatch presets which allows you to quickly optimize the tone of up to 100 specific instruments and microphones at the touch of a button. For additional inputs and an array of effects and tone-shaping tools,add the optional T1 ToneMatch audio engine.

L1 Model I was designed to be noticeably lightweight and portable,and can be fitted easily into the boot of a small car, with assembly and disassembly only taking minutes.

Features includeA…

• Integrated power amplifiers in power stand deliver clean, precise amplification for L1 Model I loudspeaker and up to two B1 bass modules.
  
• Channel inserts/effects loops for connecting external effects and processors to channels 1 and 2 via A¼" TRS line input/output jack. Use a stereo plug to connect the send and return signals with one cord.
  
• Bass module out for amplified bass output signal to one or two B1 bass modules. L1 system automatically adjusts equalization appropriately when bass modules are connected.
  
• Bass line out delivers post-DSP bass signal output. Accepts A¼" TRS phone cable. Use to connect powered subwoofer,additional amplification system or BoseA® PackLiteA® amplifier with up to two additional bass modules.
  
• Digital data out sends digital mix of channels 1 and 2 to external recording gear at 48KHz sample rate.
  
• Digital data in for updating product firmware and ToneMatch presets.
  
• R1 remote input for included remote control and 16 cable. Controls include Tone - providing -12 dB cut to +12 dB boost of high, mid and low frequencies on channels 1 and 2. Level Control - with LED meters to allow for proper gain level setting. Master Level - To control the volume of all 4 of the input channels at once.
  
• Dimensions L1 Model I Cylindrical RadiatorA® top 43H x 3.5W x 4D ( 110.5 cm x 8.9 cm x 10.5 cm )
  
• Weight 14.5 lbs (6 kg)
  
• L1 Model I Cylindrical RadiatorA® bottom 43H x 3.5W x 4D ( 110.5 cm x 8.9 cm x 10.5 cm )
  
• Weight 16 lbs (7 kg)
  
• L1 Model I power stand 5H x 26W x 26D ( 12.7 cm x 66 cm x 66 cm )
  
• Weight 35 lbs (16 kg)
  
• B1 Bass Module 15"H x 10.25"W x 17.75"D ( 38 cm x 26 cm x 45 cm )
  
• Weight25.1 lbs (11.4 kg)
  
  
  

.