NAVIGATION
Quick Links
Compare Products
You have no items to compare.
Recently Viewed
Palmer Thruster Lead And Top Booster
The Palmer Thruster Lead and Top Booster is an effects pedal designed to make your solo cut through the mix. When switched in it can either be used to boost volume alone, or to boost your instruments top end to create a brighter, cutting tone.
Two presets can be saved and switched in individually to allow for a variety of boosting tones to be available at the tip of your toes.
SpecificationsA .
.
Two presets can be saved and switched in individually to allow for a variety of boosting tones to be available at the tip of your toes.
SpecificationsA .
- Function: Lead und Top/Treble booster,2 selectable Presets
- Electronics: Discrete circuit with FET-Transistors at the input
- Nominal input impedance: 1 M 0hm, output impedance 1k Ohm
- Maximal output level before clipping: 10Volt rms
- BOOST-Function: Position FLAT max. 12dB,(4 x)
- Peak frequencies: F1 = 500Hz,F2 = 2kHz,F3 = 4kHz
F4 = 1000Hz,F5 = 3kHz,F6 = 6kHz
- Maximal boost typical + 14dB.
- Power supply: DC-Barrel connector for 5.5mm shaft with 2.1mm inner hole
- Polarity: Shaft positive, pin negative (ground)
- 9V DC A± 10% (9 Volt stabilized direct voltage)
- Current draw: max 80mA (0,08A)
- Housing: 1.5mm tin sheet, Dimensions: 155mm x 135mm x 50mm
.
Write Your Own Review
You're reviewing: Palmer Thruster Lead And Top Booster
No Avaialble Video